Firmware Updates for Your SebaKMT® Devices
Keep your SebaKMT® devices up to date with the latest firmware versions. In our download section, you'll find the updates you need to optimize the performance, security, and features of your devices. Download the latest firmware quickly and easily.
Important Note!
Unless otherwise specified, every ZIP file must be extracted before the update process!
HLE 7000
23.1 MB – Version 1.11.0
MD5: 8427A6E1485BDEAE709EF76B3B0361F2
Important Note!
After the update, you must reset the device to its original factory settings. This will restore all settings to their factory defaults and prevent any potential incompatibilities with the new firmware.
CS-7
Note
CS-7 devices are shipped from the factory with firmware version V001.001.001.
If an updated firmware version becomes available, we will make the corresponding update available for download here. However, there is currently no new firmware update for the CS-7. Please visit this page regularly to stay informed about future updates.
COR C-3
Frequency 868–433 MHz
1 MB – Version 2.011
MD5: d5ff136b57b8a1b32abc0a982cdfc81e
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 868–449 MHz
1 MB – Version 2.011
MD5: b756e4840175b65ef2552e218015b6c2
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 868–456 MHz
1 MB – Version 2.011
MD5: 159a1f10265cfb63e991b937ffd6e9b7
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 868–458 MHz
1 MB – Version 2.011
MD5: c9e2cda9892c32d2be5a2573b850cb94
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 913–469 MHz
1 MB – Version 2.011
MD5: 3ed0e816f15460901aca5ed2e3b54497
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 916–458 MHz
1 MB – Version 2.011
MD5: a8ec740d85f0590815a89dd102f4e77c
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
Frequency 916–469 MHz
1 MB – Version 2.011
MD5: ad5eadd3fcacbe2aab5e2d67d58c0a26
- Updating the language packs
- Support for a new DSP without internal flash memory
- Troubleshooting: Correction for Saved Correlations with Swapped Power Transmitters
- Enhanced support for the M12 Touch display
COR PT-3
Frequency 868–433 MHz
Frequency 868–458 MHz
Frequency 913–469 MHz
Frequency 916–458 MHz
Frequency 916–469 MHz
LOG CDR-3-1 (for touch panel version only)
Important Notice!
This firmware is not compatible with the LOG CDR-3 model without a touchscreen. Please do not install this update on that device, as it may cause malfunctions or impair system performance. Use only the firmware approved for your model.
LOG Dx, TDM 200
LOG D-3, SebaFlow, TDM 300
LOG RI, LOG RI+
REPEATER 3
GT-3-NB-IoT
GT-3-S
LOG GSM-3 (ID´s < 1000)
LOG GSM-3 (IDs > 1000)
PocketServer PS-3
Important Update Notice:
Download the ZIP file to a USB flash drive and transfer it to the Pocket Server. Please DO NOT unzip the file!